Increasing Production Efficiency in Handicraft Small Industries in West Java Through the Utilization of Technological Innovation
DOI:
https://doi.org/10.58812/wsjee.v1i04.391Keywords:
Production Efficiency, Small Industries, Technological, InnovationAbstract
This study looks at the dynamics of technical innovation adoption and how it affects the productivity of small-scale craft businesses in West Java, Indonesia. A quantitative approach was used to collect data from 110 small craft businesses, including statistical analysis and quantitative surveys. The workforce had high skill levels, moderate levels of technology adoption, and perceived problems such as resistance to change and financial restrictions. These findings were supported by descriptive statistics. Technology use, worker skills, and production efficiency were found to be significantly positively correlated, as evidenced by multiple regression analysis. Differences in adoption patterns between rural and urban industries were revealed through cross tabulation. The results of this study highlight the need for a customized approach, resource distribution and information exchange to enhance technical innovation in the heterogeneous craft industry in West Java.
References
C. Rizki et al., “PENGEMBANGAN PRODUK KERAJINAN DARI ANYAMAN BAMBU DI DESA BABUSSALAM KECAMATAN GERUNG KABUPATEN LOMBOK BARAT,” J. Interaktif War. Pengabdi. Pendidik., vol. 3, no. 1, pp. 1–9, 2023.
D. N. Maulidia, M. R. Kurniawan, and M. Yasin, “Analisis Struktur Industri Unggulan Terhadap Perkembangan Ekonomi Di Kota Pekalongan Jawa Tengah,” Student Res. J., vol. 1, no. 3, pp. 310–324, 2023.
J. McManus, “How do innovation, technology, and competitiveness contribute to business growth,” Technol. Innov. Int. Compet. Bus. Growth Challenges Oppor., pp. 41–61, 2021.
A. Calà, F. Boschi, P. M. Fantini, A. Lüder, M. Taisch, and J. Elger, “Migration strategies towards the digital manufacturing automation,” in The Digital Shopfloor-Industrial Automation in the Industry 4.0 Era, River Publishers, 2022, pp. 365–391.
F. Glauner and F. Glauner, “Strategies and the Momentum of Technological Change,” Futur. Viability, Bus. Model. Values Strateg. Bus. Manag. Econ. Disruptive Mark., pp. 1–10, 2016.
M. Braja and A. Gemzik-Salwach, “Competitiveness of high-tech exports in the EU countries.,” J. Int. Stud., vol. 13, no. 1, 2020.
H. Etemad and C. Keen, “Managing rapid change and rapid-growth in emerging industries,” Int. J. Entrep. Small Bus., vol. 34, no. 4, pp. 480–499, 2018.
A. Machmud, D. Nurhayati, I. Aprilianti, and W. N. Fathonah, “Effect of self efficacy ICT on technopreneurship intention of technopreneurial learning mediation: The case young generation in Indonesia,” J. Entrep. Educ., vol. 23, no. 1, pp. 1–11, 2020.
M. A. Kader, N. Mulyatini, and W. Setianingsih, “Study of Development of Small-Competitive Cooperative and Business Developments in Dealing with Industrial Era 4.0 in West Java Province,” 2022.
E. Junarsin et al., “Can technological innovation spur economic development? The case of Indonesia,” J. Sci. Technol. Policy Manag., vol. 14, no. 1, pp. 25–52, 2023.
N. F. Nasution and K. T. Wahyuni, “Industrialization and Convergence of West Java Manufacturing Labor Productivity, Indonesia,” JEJAK, vol. 15, no. 1, pp. 165–178, 2022.
H. H. Trismiyanto and E. T. Sule, “The influence of entrepreneurial competence and innovation on performance mediated by opportunities on small handicraft industry craftsmen in West Java,” Acad. Strateg. Manag. J., vol. 17, no. 6, pp. 1–9, 2018.
W. Li and S. Z. Abidin, “Parametric technology is used for the design of weaving products,” in Second International Conference on Digital Society and Intelligent Systems (DSInS 2022), SPIE, 2023, pp. 295–302.
M. Imad, C. Hopkins, A. Hosseini, N. Z. Yussefian, and H. A. Kishawy, “Intelligent machining: a review of trends, achievements and current progress,” Int. J. Comput. Integr. Manuf., vol. 35, no. 4–5, pp. 359–387, 2022.
H. Nugraha, F. B. Leksono, and D. Angelina, “Improving the visual impressions of wood-based craft products through two-dimensional engraving of patterns,” in IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2022, p. 12006.
F. Feng, N. Wang, and Q. Du, “Mechanical Design Method and Joint Simulation Analysis of Industrial Robots Based on Trajectory Planning Algorithm and Kinematics,” EAI Endorsed Trans. Scalable Inf. Syst., vol. 10, no. 5, 2023.
R. Roberts, R. Flin, D. Millar, and L. Corradi, “Psychological factors influencing technology adoption: A case study from the oil and gas industry,” Technovation, vol. 102, p. 102219, 2021.
J. Billanes and P. Enevoldsen, “A critical analysis of ten influential factors to energy technology acceptance and adoption,” Energy Reports, vol. 7, pp. 6899–6907, 2021, doi: https://doi.org/10.1016/j.egyr.2021.09.118.
R. Roberts, R. Flin, and L. Corradi, “Accelerating Technology Adoption: A Benchmarking Study of Organisational Innovation Adoption Culture in Upstream Oil and Gas,” in SPE Offshore Europe Conference and Exhibition, SPE, 2021, p. D021S004R001.
B. Lianto, “Identifying Key Assessment Factors for a Company’s Innovation Capability Based on Intellectual Capital: An Application of the Fuzzy Delphi Method,” Sustainability, vol. 15, no. 7, p. 6001, 2023.
V. Skeeba and V. Ivancivsky, “Obrabotka metallov”.
A. Nugroho and F. Santiago, “The Effect of Patent Rights on Innovation of The Technology Industry in Indonesia,” J. Res. Soc. Sci. Econ. Manag., vol. 2, no. 11, pp. 2610–2620, 2023.
J. Chovancová, M. Majerník, P. Drábik, and Z. Štofková, “Environmental technological innovations and the sustainability of their development,” Ecol. Eng. Environ. Technol., vol. 24, no. 4, pp. 245–252, 2023.
Z. Cao, M. Li, B. Wang, and P. Lv, “Research on Technology Innovation and Income-generating Efficiency of Enterprises from the Perspective of Science and Technology Management,” Highlights Business, Econ. Manag., vol. 8, pp. 379–384, 2023.
L. B. L. Da Silva, E. B. Ferreira, R. J. P. Ferreira, E. A. Frej, L. R. P. Roselli, and A. T. De Almeida, “Paradigms, Methods, and Tools for Multicriteria Decision Models in Sustainable Industry 4.0 Oriented Manufacturing Systems,” Sustainability, vol. 15, no. 11, p. 8869, 2023.
Y. Zhong and H. C. Moon, “Investigating the Impact of Industry 4.0 Technology through a TOE-Based Innovation Model,” Systems, vol. 11, no. 6, p. 277, 2023.
F. T. da Silva, I. C. Baierle, R. G. de F. Correa, M. A. Sellitto, F. A. P. Peres, and L. M. Kipper, “Open Innovation in Agribusiness: Barriers and Challenges in the Transition to Agriculture 4.0,” Sustainability, vol. 15, no. 11, p. 8562, 2023.
T. Savage, A. del R. Chanona, and G. Oluleye, “Robust Market Potential Assessment: Designing optimal policies for low-carbon technology adoption in an increasingly uncertain world,” arXiv Prepr. arXiv2304.10203, 2023.
I. Almatrodi, F. Li, and M. Alojail, “Organizational Resistance to Automation Success: How Status Quo Bias Influences Organizational Resistance to an Automated Workflow System in a Public Organization,” Systems, vol. 11, no. 4, p. 191, 2023.
D. Destari, H. Tannady, A. G. Zainal, S. Nurjanah, and J. M. J. Renwarin, “The Improvement of Employee’s Performance in Plastic Ore Industry: Mediating Role of Work Motivation.,” Turkish Online J. Qual. Inq., vol. 12, no. 7, 2021.
M. Hidayat, R. Salam, Y. S. Hidayat, A. Sutira, and T. P. Nugrahanti, “Sustainable Digital Marketing Strategy in the Perspective of Sustainable Development Goals,” Komitmen J. Ilm. Manaj., vol. 3, no. 2, pp. 100–106, 2022.
T. P. Nugrahanti, “Analyzing the Evolution of Auditing and Financial Insurance: Tracking Developments, Identifying Research Frontiers, and Charting the Future of Accountability and Risk Management,” West Sci. Account. Financ., vol. 1, no. 02, pp. 59–68, 2023.
N. Trinandari Prasetyo Nugrahanti, “Dysfunctional Audit Behavior and Sign Off Premature Audit Procedures: Case Study of Jakarta Public Accounting Firm,” 2020.
G. L. Tortorella, R. Giglio, and D. H. Van Dun, “Industry 4.0 adoption as a moderator of the impact of lean production practices on operational performance improvement,” Int. J. Oper. Prod. Manag., vol. 39, no. 6/7/8, pp. 860–886, 2019.
R. Bürgisser, “Policy Responses to Technological Change in the Workplace,” 2023.
A. Shi and R. Michelitsch, “Training, technology and innovation, and job growth,” The World Bank, 2012.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Alfa Santoso Budiwidjojo Putra, Setiawan Wibowo
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Facebook 
Instagram 
Twitter 
Youtube 
+62 821 1557 5700 
info@westscience-press.com 