The Effect of Project Management System Implementation, BIM Technology, and Cloud Collaboration on Construction Project Efficiency in Riau

Authors

  • Aris Krisdiyanto Universitas 17 Agustus 1945 Semarang
  • Benelekser Tumanggor Universitas Ichsan Satya
  • Ade Octaviansyah Universitas Ichsan Satya
  • Herman Purwoko Putro Universitas Ichsan Satya
  • Kemmala Dewi Universitas 17 Agustus 1945 Semarang

DOI:

https://doi.org/10.58812/wsis.v2i08.1236

Keywords:

Construction Project Efficiency, Building Information Modeling, Cloud Collaboration, Project Management Systems, Construction Technology Integration

Abstract

This study examines the impact of Project Management System (PMS) implementation, Building Information Modeling (BIM) technology, and Cloud Collaboration on construction project efficiency in Riau, Indonesia. Utilizing a quantitative research design, data were collected from 190 professionals involved in construction projects and analyzed using Structural Equation Modeling-Partial Least Squares (SEM-PLS). The findings reveal that all three factors—PMS implementation, BIM technology, and Cloud Collaboration—positively and significantly influence construction project efficiency. Among these, BIM technology demonstrates the strongest impact, followed by Cloud Collaboration and PMS implementation. The high R² value (0.752) indicates that these factors collectively explain a substantial portion of the variance in project efficiency. This study underscores the importance of integrating advanced technological tools and management practices to enhance project outcomes in the construction industry. The results provide practical insights for construction firms in Riau and similar regions, suggesting that the adoption of BIM, Cloud Collaboration, and PMS can lead to significant improvements in project efficiency.

References

R. Ardila, M. Y. D. Padra, K. Y. V. Martinez, and G. M. Aguilar, “Factors affecting labor productivity in the global construction industry: a critical review, classification and ranking,” Sci. Tech., vol. 29, no. 01, pp. 18–33, 2024.

A. Alsharef, A. Ovid, S. M. Jamil Uddin, and A. Albert, “Biggest Challenges Facing the Construction Industry,” in Construction Research Congress 2024, pp. 652–660.

E. Farida, Q. Sholihah, S. Andarini, and M. H. Natsir, “Analisis Faktor Kunci dan Tantangan dalam Pemenuhan Standar Keselamatan dan Kesehatan Kerja (K3) untuk Mencapai Infrastruktur yang Berkualitas: Sebuah Literatur Review,” Konstr. Publ. Ilmu Tek. Perenc. Tata Ruang dan Tek. Sipil, vol. 2, no. 3, pp. 83–99, 2024.

S. Durdyev and S. Ismail, “Role of the construction industry in economic development of Turkmenistan,” Changes, vol. 64, no. 0, 2012.

V. Selvamugam1, M. L. M. Gheda, and M. S. Misnan, “Critical Characteristics Review for Research and Development Facilities Construction Project in Malaysian”.

R. Jaymin-Sanchaniya, D. Thomson, A. Kundzina, and I. Geipele, “EFFECTIVE PROJECT MANAGEMENT PRACTICES IN CONSTRUCTION INDUSTRY: QUANTITATIVE STUDY”.

X. Zhang, S. Azhar, A. Nadeem, and M. Khalfan, “Using Building Information Modelling to achieve Lean principles by improving efficiency of work teams,” Int. J. Constr. Manag., vol. 18, no. 4, pp. 293–300, 2018.

L. P. León-Romero, M. Aguilar-Fernández, A. Luque-Sendra, F. Zamora-Polo, and M. Francisco-Márquez, “Characterization of the information system integrated to the construction project management systems,” Heliyon, 2024.

S. S. Fonseca, P. A. Benito, and C. Piña Ramírez, “Digital Horizons in Construction: A Comprehensive System for Excellence in Project Management,” Buildings, vol. 14, no. 7, p. 2228, 2024.

D. R. P. Manikandaprabhu and S. Shwetha, “Real-Time Collaborative Code Editor”.

M. F. Castro-Arquinigo et al., “Collaborative Tools for Project Management: A Technological Review,” in 2023 IEEE Colombian Caribbean Conference (C3), IEEE, 2023, pp. 1–6.

S. Vinod, V. R. Vimal, S. Selvanayaki, and S. D. Hussain, “Screen recording and Sharing over the cloud Platform For Remote Teams And Cross-Functional Teams,” in 2023 International Conference on Research Methodologies in Knowledge Management, Artificial Intelligence and Telecommunication Engineering (RMKMATE), IEEE, 2023, pp. 1–5.

Р. ВАСЬКІВ and Н. ВЕРЕТЕННІКОВА, “FEATURES OF THE USE OF INFORMATION AND COMMUNICATION TECHNOLOGIES TO SUPPORT PROJECT PROCESSES IN DISTRIBUTED TEAMS,” Comput. Syst. Inf. Technol., no. 4, pp. 36–43, 2023.

Z. Ishak, R. A. Abbas, and V. A. L. T. M. Karunanithi, “A Model for Collaboration Tool Adoption in Distributed Project Team,” in 2022 IEEE 10th Conference on Systems, Process & Control (ICSPC), IEEE, 2022, pp. 100–105.

J. M. Sardroud and M. Shirzadi, “BIM Implementation for PMBOK Enhancement in the Construction Industry,” Proc. 60th Annu. Assoc. Sch., vol. 5, pp. 695–703, 2024.

J. Akter, S. D. Datta, M. Islam, B. A. Tayeh, S. A. Sraboni, and N. Das, “Assessment and analysis of the effects of implementing building information modelling as a lean management tool in construction management,” Int. J. Build. Pathol. Adapt., 2024.

A. Waqar, I. Bin Othman, and M. S. Mansoor, “Building information modeling (BIM) implementation and construction project success in Malaysian construction industry: mediating role of project control,” Eng. Constr. Archit. Manag., 2024.

P. X. W. Zou and B. A. Roslan, “Different perspectives towards using web-based project management systems in construction: large enterprises versus small-and medium-sized enterprises,” Archit. Eng. Des. Manag., vol. 1, no. 2, pp. 127–143, 2005.

S. Abbaspour and S. Dabirian, “Evaluation of labor hiring policies in construction projects performance using system dynamics,” Int. J. Product. Perform. Manag., vol. 69, no. 1, pp. 22–43, 2020.

T. S. Lim, Z. Y. Low, L. T. Soon, H. S. Ilmi, K. J. Kam, and M. A. Kamarazaly, “The Implementation of BIM Software in Different Construction Stages,” in Insights on Resiliency and Urban Development, IGI Global, 2024, pp. 269–288.

S. Azhar, M. Khalfan, and T. Maqsood, “Building information modeling (BIM): now and beyond,” Australas. J. Constr. Econ. Build., vol. 12, no. 4, pp. 15–28, 2012.

N. Benmicia and L. Belarbi, “BIM: A COLLABORATIVE APPROACH TO ARCHITECTURAL PROJECT MANAGEMENT,” Int. J. Innov. Technol. Soc. Sci., no. 2 (42), 2024.

A. Mahalingam, A. K. Yadav, and J. Varaprasad, “Investigating the role of lean practices in enabling BIM adoption: Evidence from two Indian cases,” J. Constr. Eng. Manag., vol. 141, no. 7, p. 5015006, 2015.

M. A. Musarat, W. S. Alaloul, M. H. F. Khan, S. Ayub, and C. P. L. Guy, “Evaluating cloud computing in construction projects to avoid project delay,” J. Open Innov. Technol. Mark. Complex., vol. 10, no. 2, p. 100296, 2024.

Y. Jiao, Y. Wang, S. Zhang, Y. Li, B. Yang, and L. Yuan, “A cloud approach to unified lifecycle data management in architecture, engineering, construction and facilities management: Integrating BIMs and SNS,” Adv. Eng. informatics, vol. 27, no. 2, pp. 173–188, 2013.

S. G. Dastider and L. Rosa, “Lesson Learned from a Cast Study Investigation to Identify an Affordable Alternative to Cloud-based Worksharing,” Innov. Sci. Technol., p. 111, 2022.

V. Alevizos, I. Georgousis, A. Simasiku, S. Karypidou, and A. Messinis, “Evaluating the Inclusiveness of Artificial Intelligence Software in Enhancing Project Management Efficiency--A Review,” arXiv Prepr. arXiv2311.11159, 2023.

T. J. Lesebo, P. Rambe, and T. Ndofirepi, “Effects of adopting mobile technologies on the managerial competencies of construction firms,” South African J. Inf. Manag., vol. 25, no. 1, p. 1627, 2023.

Y. S. Hammed and A. A. Salisu, “Technology Shocks and the Efficiency of Equity Markets in the Developed and Emerging Economies: A Global VAR Approach,” J. Risk Financ. Manag., vol. 16, no. 3, p. 154, 2023.

J. F. Hair Jr, L. M. Matthews, R. L. Matthews, and M. Sarstedt, “PLS-SEM or CB-SEM: updated guidelines on which method to use,” Int. J. Multivar. Data Anal., vol. 1, no. 2, pp. 107–123, 2017.

A. Joshi, S. Kale, S. Chandel, and D. K. Pal, “Likert scale: Explored and explained,” Br. J. Appl. Sci. Technol., vol. 7, no. 4, pp. 396–403, 2015.

J. F. Hair, C. M. Ringle, and M. Sarstedt, A Primer on Partial Least Squares Structural Equation Modelling (PLS-SEM). 2e Edition. USA: SAGE Publications, 2017.

A. Olechowski, Y. Deng, E. DaMaren, I. Verner, U. Rosen, and M. Mueller, “All’s not Fair in CAD: an investigation of equity of contributions to collaborative cloud-based design projects,” Comput. Aided Des. Appl, vol. 20, no. 3, pp. 574–583, 2023.

Z. Zhou, J. Irizarry, and Y. Lu, “A multidimensional framework for unmanned aerial system applications in construction project management,” J. Manag. Eng., vol. 34, no. 3, p. 4018004, 2018.

K. M. Alfawaz and F. M. Aljedani, “Construction of Project Management Using Information System,” Commun. Math. Appl., vol. 13, no. 2, p. 823, 2022.

Downloads

Published

2024-08-30

How to Cite

Aris Krisdiyanto, Tumanggor, B., Octaviansyah, A., Putro, H. P., & Dewi, K. (2024). The Effect of Project Management System Implementation, BIM Technology, and Cloud Collaboration on Construction Project Efficiency in Riau. West Science Interdisciplinary Studies, 2(08), 1591–1602. https://doi.org/10.58812/wsis.v2i08.1236

Issue

Vol. 2 No. 08 (2024): West Science Interdisciplinary Studies

Section

Articles

License

Copyright (c) 2024 Aris Krisdiyanto, Benelekser Tumanggor, Ade Octaviansyah, Herman Purwoko Putro, Kemmala Dewi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.