The Effect of Investment in Green Technology and Renewable Technology Adoption on Energy Efficiency and Carbon Emissions Reduction in Indonesian Manufacturing Companies
DOI:
https://doi.org/10.58812/wsis.v1i11.347Keywords:
Investment, Green Technology, Renewable Technology Adoption, Energy Efficiency, Carbon Emissions Reduction, Manufacturing Companies, SEM PLS, IndonesiaAbstract
This research explores the interactions between green technology investment, renewable technology adoption, and their effects on carbon emission reduction, energy efficiency, and job satisfaction in manufacturing firms. Using a diverse sample of manufacturing firms, this study employs Structural Equation Modeling - Partial Least Squares (SEM-PLS) to analyze the relationships among these key variables. The findings suggest a strong positive impact of green technology investment and renewable technology adoption on carbon emission reduction. In addition, green technology investment emerged as a significant driver of energy efficiency. The study also highlights the challenges in fully optimizing energy efficiency and reveals the positive impact of renewable technology adoption on job satisfaction. These insights have far-reaching implications for policymakers and industry leaders looking to drive sustainable practices in the manufacturing sector.
References
M. J. Triebe et al., “Perspectives on future research directions in green manufacturing for discrete products,” Green Manuf. Open, vol. 1, no. IS-J 11,041, 2023.
A. Malaga and S. Vinodh, “Analysis of factors influencing smart and sustainable manufacturing systems using a multi-criteria decision making tool,” in Innovation and Sustainable Manufacturing, Elsevier, 2023, pp. 109–124.
S. Singhal, L. Ahuja, and H. Monga, “Sustainable manufacturing integrated into cloud-based data analytics for e-commerce SMEs,” in 2023 International Conference on Artificial Intelligence and Smart Communication (AISC), IEEE, 2023, pp. 1436–1440.
L. Suhányi, A. Suhányiová, J. Kádárová, and J. Janeková, “Relationships between Average Wages in the Manufacturing Sector and Economic Indicators of the Manufacturing Sector in the Region of Visegrad Group Countries,” Sustainability, vol. 15, no. 5, p. 4164, 2023.
T. P. Nugrahanti and A. S. Pratiwi, “The Remote Audit and Information Technology: The impact of Covid-19 Pandemics,” JABE (JOURNAL Account. Bus. Educ., vol. 8, no. 1, pp. 15–39, 2023.
P. T. Nugrahanti, “Pengaruh Ukuran Kantor Akuntan Publik, Pergantian Kantor Auntan Publik, Spesialisasi Audit di Bidang Industri Klien, dan Independensi Akuntan Publik Terhadap Kualitas Audit Serta Implikasinya Pada Kualitas Disclosure Laporan Keuangan.” Disertasi, Universitas Padjajaran, 2013.
S. Supriandi and H. N. Muthmainah, “Penerapan Teknologi Mesin Pembelajaran Dalam Sistem Manufaktur: Kajian Bibliometrik,” J. Multidisiplin West Sci., vol. 2, no. 09, pp. 833–846, 2023.
Y. I. B, A. Ardhiyansyah, and U. B. Jaman, The Impact of the Principal ’ s Leadership Style and the Organizational Culture of the School on Teacher Performance in SMAN 1 Cicalengka in Bandung City , West Java, vol. 1. Atlantis Press SARL. doi: 10.2991/978-2-38476-088-6.
S. C. N. Ramadhany, W. A. Jauhari, and C. N. Rosyidi, “MODEL PERSEDIAAN PADA SUPPLY CHAIN DENGAN MEMPERTIMBANGKAN EMISI KARBON DAN PERMINTAAN YANG BERGANTUNG PADA HARGA JUAL PRODUK,” J. Ilm. Tek. Ind., vol. 11, no. 1, pp. 57–70, 2023.
A. Jahanger, I. Ozturk, J. C. Onwe, T. E. Joseph, and M. R. Hossain, “Do technology and renewable energy contribute to energy efficiency and carbon neutrality? Evidence from top ten manufacturing countries,” Sustain. Energy Technol. Assessments, vol. 56, p. 103084, 2023.
S. Z. Jia, “Waste energy harvesting in sustainable manufacturing,” in Sustainable Manufacturing Processes, Elsevier, 2023, pp. 231–256.
S. Fareri, R. Apreda, V. Mulas, and R. Alonso, “The Energy Worker Profiler from Technologies to Skills to Realize Energy Efficiency in Manufacturing,” arXiv Prepr. arXiv2301.09445, 2023.
A. D. Saputra, R. Yanuardi, and A. Maharani, “THE ROLE OF THE MANUFACTURING ON THE INDONESIAN ECONOMY,” Indones. J. Multidiscip. Sci., vol. 2, no. 1, pp. 157–166, 2023.
R. Y. Bramasta and Y. Budiasih, “THE EFFECT OF PROFITABILITY, BOOK TAX DIFFERENCE AND TAX PLANNING ON INCOME MANAGEMENT IN AUTOMATICALLY SUB-SECTOR MANUFACTURING COMPANIES AND COMPONENTS REGISTERED IN INDONESIA STOCK EXCHANGE,” Int. J. Econ. Educ. Entrep., vol. 1, no. 1, pp. 22–30, 2021.
N. A. P. Harahap, F. Al Qadri, D. I. Y. Harahap, M. Situmorang, and S. Wulandari, “Analisis Perkkembangan Industri Manufaktur Indonesia,” El-Mal J. Kaji. Ekon. Bisnis Islam, vol. 4, no. 5, pp. 1444–1450, 2023.
S. Amalia, A. I. Kesuma, and A. T. Pramono, “Which is more important for Indonesia: Foreign Investment, Effective Exchange Rates, or Inflation?(Study on Indonesia’s workforce over the past three decades)”.
H. D. Putri and H. Agustin, “Apakah Inovasi Hijau Dan Pengungkapan Emisi Karbon Dapat Mempengaruhi Nilai Perusahaan Pada Perusahaan Manufaktur?,” J. Akad. Akunt., vol. 6, no. 1, pp. 107–124, 2023.
A. Lutfi et al., “Green Environmental Management System To Support Envi-Ronmental Performance: What Factors Influencing SMEs To Adopt Green Innovations?,” 2023.
J. Zhou, Y. Zhou, and X. Bai, “Can Green-Technology Innovation Reduce Atmospheric Environmental Pollution?,” Toxics, vol. 11, no. 5, p. 403, 2023.
X. He, “Effects of the Green Policy Environment on Renewable Energy Investment and Effect Evaluation of Green Policies,” Discret. Dyn. Nat. Soc., vol. 2023, 2023.
X. Hu et al., “Ultrafast materials synthesis and manufacturing techniques for emerging energy and environmental applications,” Chem. Soc. Rev., 2023.
S. Ben Belgacem, G. Khatoon, and A. Alzuman, “Role of Renewable Energy and Financial Innovation in Environmental Protection: Empirical Evidence from UAE and Saudi Arabia,” Sustainability, vol. 15, no. 11, p. 8684, 2023.
O. Prokopenko et al., “Impact of Investments and R&D Costs in Renewable Energy Technologies on Companies’ Profitability Indicators: Assessment and Forecast,” Energies, vol. 16, no. 3, p. 1021, 2023.
K. R. Skene, “The dark shadows of the jolly green giants: urgent policy and research priorities in renewable energy technologies,” Sustain. Clim. Chang., vol. 14, no. 5, pp. 335–357, 2021.
S. Sundaramoorthy, D. Kamath, S. Nimbalkar, C. Price, T. Wenning, and J. Cresko, “Energy Efficiency as a Foundational Technology Pillar for Industrial Decarbonization,” Sustainability, vol. 15, no. 12, p. 9487, 2023.
M. Beccarello and G. Di Foggia, “The Role of Knowledge Development in Manufacturing Sustainability,” J. Sustain. Dev., vol. 16, no. 1, p. 136, 2023.
Y. H. Mughal et al., “Employees’ Perceptions of Green Supply-Chain Management, Corporate Social Responsibility, and Sustainability in Organizations: Mediating Effect of Reflective Moral Attentiveness,” Sustainability, vol. 15, no. 13, p. 10528, 2023.
S. Schwendemann, Z. Amjad, and A. Sikora, “A survey of machine-learning techniques for condition monitoring and predictive maintenance of bearings in grinding machines,” Comput. Ind., vol. 125, p. 103380, 2021.
N. A. Madah, “The Impact of Green Manufacturing Strategies on Organization Competitive Performance: a Comparative Study of Opinions of A Sample of Departments Operating in (Northern Cement Associate) and (Southern Cement State,” Int. J. Prof. Bus. Rev. Int. J. Prof. Bus. Rev., vol. 8, no. 5, p. 19, 2023.
C. Bührer and C. Hagist, “The effect of digitalization on the labor market,” Palgrave Handb. Manag. Contin. Bus. Transform., pp. 115–137, 2017.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Gusti Rusmayadi, Umi Salawati, Andi Haslinah, Loso Judijanto
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Facebook 
Instagram 
Twitter 
Youtube 
+62 821 1557 5700
westscience.journals@gmail.com