Bibliometric Mapping of Green Technology Innovation in the Manufacturing Industry

Authors

  • Loso Judijanto IPOSS Jakarta, Indonesia
  • Chevy Herli Sumerli A. Universitas Pasundan
  • Filbert Ivander Institut Teknologi dan Bisnis Sabda Setia
  • Brian Sebastian Salim Institut Teknologi dan Bisnis Sabda Setia

DOI:

https://doi.org/10.58812/wsis.v1i12.524

Keywords:

Bibliometric Mapping, Green Technology Innovation, Manufacturing Industry

Abstract

This bibliometric mapping study provides a comprehensive analysis of green technology innovation within the manufacturing industry, employing quantitative methods to uncover thematic clusters, research trends, author collaborations, and research gaps. Three distinct thematic clusters—Sustainable Manufacture, Enterprise, and Challenge—emerge, each offering insights into prevalent terms and themes. The analysis of research trends reveals the evolution of key terms over time, highlighting emerging topics. Author collaboration mapping identifies influential researchers and collaborative networks, facilitating interdisciplinary partnerships. The study's implications extend to resource allocation, policy formulation, and industry best practices, emphasizing academia's pivotal role in sustainable manufacturing. Overall, this research serves as a roadmap for future endeavors, fostering collaboration, informing policy, and driving innovation in green technology within the manufacturing sector.

References

Y. Shen and X. Zhang, “Intelligent manufacturing, green technological innovation and environmental pollution,” J. Innov. Knowl., vol. 8, no. 3, p. 100384, 2023.

X. Jie, “Research on green manufacturing innovation based on resource environment protection,” in IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2017, p. 12112.

N. Punj, A. Ahmi, A. Tanwar, and S. A. Rahim, “Mapping the field of green manufacturing: A bibliometric review of the literature and research frontiers,” J. Clean. Prod., p. 138729, 2023.

M. S. Usmani, J. Wang, N. Ahmad, M. Iqbal, and R. I. Ahmed, “Mapping green technologies literature published between 1995 and 2019: a scientometric review from the perspective of the manufacturing industry,” Environ. Sci. Pollut. Res., vol. 28, pp. 28848–28864, 2021.

A. Purnomo, N. Asitah, E. Rosyidah, H. Ismanto, and R. Lestari, “Green technology: lesson from research mapping through bibliometric analysis,” in IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2022, p. 12022.

A. Haleem, M. Javaid, R. P. Singh, R. Suman, and M. A. Qadri, “A pervasive study on Green Manufacturing towards attaining sustainability,” Green Technol. Sustain., p. 100018, 2023.

P. Bradu et al., “Recent advances in green technology and Industrial Revolution 4.0 for a sustainable future,” Environ. Sci. Pollut. Res., pp. 1–32, 2022.

D. Bendig, L. Kleine-Stegemann, and K. Gisa, “The green manufacturing framework—A systematic literature review,” Clean. Eng. Technol., p. 100613, 2023.

R. Hu, F. Shahzad, A. Abbas, and X. Liu, “Decoupling the influence of eco-sustainability motivations in the adoption of the green industrial IoT and the impact of advanced manufacturing technologies,” J. Clean. Prod., vol. 339, p. 130708, 2022.

T. Kong, T. Feng, and C. Ye, “Advanced manufacturing technologies and green innovation: The role of internal environmental collaboration,” Sustainability, vol. 8, no. 10, p. 1056, 2016.

C. Li and S. Wang, “Digital optimization, green R&D collaboration, and green technological innovation in manufacturing enterprises,” Sustainability, vol. 14, no. 19, p. 12106, 2022.

W. S. Ebhota and T.-C. Jen, “Fossil fuels environmental challenges and the role of solar photovoltaic technology advances in fast tracking hybrid renewable energy system,” Int. J. Precis. Eng. Manuf. Technol., vol. 7, pp. 97–117, 2020.

S. I. Mohammed, “Advantages of green technology to mitigate the environment problems,” in IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2021, p. 12133.

M. Wang, Y. Li, and G. Liao, “Research on the impact of green technology innovation on energy total factor productivity, based on provincial data of China,” Front. Environ. Sci., vol. 9, p. 710931, 2021.

M. S. Andersen, “An introductory note on the environmental economics of the circular economy,” Sustain. Sci., vol. 2, no. 1, pp. 133–140, 2007.

M. Li, X. Wang, Z. Wang, B. Maqbool, A. Hussain, and W. A. Khan, “Bibliometric analysis of the research on the impact of environmental regulation on green technology innovation based on CiteSpace,” Int. J. Environ. Res. Public Health, vol. 19, no. 20, p. 13273, 2022.

S. Zhang, X. Wang, J. Xu, Q. Chen, M. Peng, and J. Hao, “Green manufacturing for achieving carbon neutrality goal requires innovative technologies: A bibliometric analysis from 1991 to 2022,” J. Environ. Sci., 2023.

N. Nuryakin, “Green Innovation: Trend Research Using Bibliometric Analysis,” J. Manaj. Bisnis, vol. 14, no. 2, pp. 313–322, 2023.

Downloads

Published

2023-12-30

How to Cite

Judijanto, L., Sumerli A., C. H., Ivander, F., & Salim, B. S. (2023). Bibliometric Mapping of Green Technology Innovation in the Manufacturing Industry. West Science Interdisciplinary Studies, 1(12), 1542–1552. https://doi.org/10.58812/wsis.v1i12.524

Issue

Vol. 1 No. 12 (2023): West Science Interdisciplinary Studies

Section

Articles

License

Copyright (c) 2023 Loso Judijanto, Chevy Herli Sumerli A., Filbert Ivander, Brian Sebastian Salim

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.